MALE CONNECTOR FOR METAL GASKET SEAL
DMC-RS
| TUBE (METRIC) ISO PARALLEL THREAD | |||||||||
| PART NUMBER | A TUBE O.D. | T ISO | D | K | W HEX. FLAT | N | M | L | I |
| mm | in | mm | mm | mm | mm | mm | mm | mm | |
| DMC – 3M – 2RP | 3 | G 1/8 | 2.4 | 13.8 | 14 | 23.4 | 7.1 | 30.0 | 12.9 |
| DMC – 3M – 4RP | 3 | G 1/4 | 2.4 | 18.0 | 19 | 28.7 | 11.2 | 35.3 | 12.9 |
| DMC – 4M – 2RP | 4 | G 1/8 | 2.4 | 13.8 | 14 | 24.1 | 7.1 | 30.7 | 13.7 |
| DMC – 6M – 2RP | 6 | G 1/8 | 4.0 | 13.8 | 14 | 24.9 | 7.1 | 32.3 | 15.3 |
| DMC – 6M – 4RP | 6 | G 1/4 | 4.8 | 18.0 | 19 | 30.2 | 11.2 | 37.6 | 15.3 |
| DMC – 6M – 6RP | 6 | G 3/8 | 4.8 | 21.8 | 22 | 31.5 | 11.2 | 38.9 | 15.3 |
| DMC – 6M – 8RP | 6 | G 1/2 | 4.8 | 26.0 | 27 | 37.3 | 14.2 | 44.7 | 15.3 |
| DMC – 8M – 2RP | 8 | G 1/8 | 4.0 | 13.8 | 15 | 25.7 | 7.1 | 33.2 | 16.2 |
| DMC – 8M – 4RP | 8 | G 1/4 | 6.4 | 18.0 | 19 | 31.0 | 11.2 | 38.5 | 16.2 |
| DMC – 8M – 6RP | 8 | G 3/8 | 6.4 | 21.8 | 22 | 32.3 | 11.2 | 39.8 | 16.2 |
| DMC – 8M – 8RP | 8 | G 1/2 | 6.4 | 26.0 | 27 | 38.1 | 14.2 | 45.6 | 16.2 |
| DMC – 10M – 4RP | 10 | G 1/4 | 5.9 | 18.0 | 19 | 31.8 | 11.2 | 39.4 | 17.2 |
| DMC – 10M – 6RP | 10 | G 3/8 | 7.9 | 21.8 | 22 | 33.0 | 11.2 | 40.6 | 17.2 |
| DMC – 10M – 8RP | 10 | G 1/2 | 7.9 | 26.0 | 27 | 38.9 | 14.2 | 46.5 | 19.5 |
| DMC – 12M – 4RP | 12 | G 1/4 | 5.9 | 18.0 | 22 | 32.5 | 11.2 | 42.6 | 17.2 |
| DMC – 12M – 6RP | 12 | G 3/8 | 7.9 | 21.8 | 22 | 33.0 | 11.2 | 43.1 | 22.8 |
| DMC – 12M – 8RP | 12 | G 1/2 | 9.5 | 26.0 | 27 | 38.9 | 14.2 | 49.0 | 22.8 |
| DMC – 12M – 12RP | 12 | G 3/4 | 9.5 | 32.0 | 35 | 42.7 | 15.7 | 52.8 | 22.8 |
| DMC – 15M – 8RP | 15 | G 1/2 | 11.9 | 26.0 | 27 | 38.9 | 14.2 | 49.0 | 22.8 |
| DMC – 16M – 6RP | 16 | G 3/8 | 7.9 | 21.8 | 24 | 33.8 | 11.2 | 43.9 | 22.4 |
| DMC – 16M – 8RP | 16 | G 1/2 | 11.9 | 26.0 | 27 | 38.9 | 14.2 | 49.0 | 22.4 |
| DMC – 18M – 8RP | 18 | G 1/2 | 11.9 | 26.0 | 27 | 38.9 | 14.2 | 49.0 | 22.4 |
| DMC – 18M – 12RP | 18 | G 3/4 | 15.1 | 32.0 | 35 | 42.7 | 15.7 | 52.8 | 22.4 |
| DMC – 20M – 8RP | 20 | G 1/2 | 11.9 | 26.0 | 30 | 40.4 | 14.2 | 50.5 | 26.0 |
| DMC – 20M – 12RP | 20 | G 3/4 | 15.9 | 32.0 | 35 | 42.7 | 15.7 | 52.8 | 26.0 |
| DMC – 22M – 12RP | 22 | G 3/4 | 15.9 | 32.0 | 35 | 42.7 | 15.7 | 52.8 | 26.0 |
| DMC – 22M – 16RP | 22 | G 1 | 18.3 | 39.0 | 40 | 45.2 | 18.3 | 55.3 | 26.0 |
| DMC – 25M – 12RP | 25 | G 3/4 | 15.9 | 32.0 | 35 | 45.2 | 15.7 | 57.5 | 31.3 |
| DMC – 25M – 16RP | 25 | G 1 | 19.8 | 39 | 40 | 47.8 | 18.3 | 60.1 | 31.3 |
| DMC – 28M – 16RP | 28 | G1 | 19.8 | 39.0 | 40 | 49.3 | 18.3 | 70.1 | 36.6 |
| DMC – 28M – 20RP | 28 | G 1-1/4 | 21.8 | 49.0 | 50 | 53.1 | 19.8 | 73.9 | 36.6 |
| DMC – 32M – 20RP | 32 | G 1-1/4 | 25.0 | 49.0 | 50 | 55.9 | 19.8 | 78.9 | 42.0 |
| DMC – 38M – 24RP | 38 | G 1-1/2 | 31.8 | 54.7 | 55 | 61.7 | 20.6 | 89.3 | 49.4 |
Reference Specififcations :
DIN – ISO 2999 •55° Thread angle
BS – 21 •Truncation of root and crest are round
JIS – B0203 •Taper angle 1° 47’
“D” – Dimension is minimum opening – dimensions are for reference only, and are subject to change without notice.
