CAP - D-LOK Engineering Pvt. Ltd.

CAP

DC

CAPPING END OF TUBE (METRIC)
PART NUMBER	A TUBE O.D.	W HEX. FLAT	N	L	I
	mm	mm	mm	mm	mm
DC – 2M	2	12	13.5	20.1	12.9
DC – 3M	3	12	13.5	20.1	12.9
DC – 4M	4	12	14.7	21.3	13.7
DC – 6M	6	14	15.7	23.1	15.3
DC – 8M	8	15	17.0	24.5	16.2
DC – 10M	10	18	19.0	26.6	17.2
DC – 12M	12	22	19.0	29.1	22.8
DC – 15M	15	24	19.8	29.9	24.4
DC – 16M	16	24	19.8	29.9	24.4
DC – 18M	18	27	21.3	31.4	24.4
DC – 20M	20	30	23.9	34.0	26.0
DC – 22M	22	30	23.9	34.0	26.0
DC – 25M	25	35	26.2	38.5	31.3
DC – 28M	28	41	27.7	48.5	36.6
DC – 32M	32	46	32.8	55.8	42.0
DC – 38M	38	55	37.8	65.4	49.4

CAPPING END OF TUBE (INCH)
PART NUMBER	A TUBE O.D.		W HEX. FLAT		N		L		I
	in	mm	in	mm	in	mm	in	mm	in	mm
DC – 1	1/16	1.58	5/16	7.9	0.44	11.17	0.59	14.98	0.34	8.6
DC – 2	1/8	3.17	7/16	11.1	0.53	13.46	0.79	20.06	0.5	12.7
DC – 3	3/16	4.76	7/16	11.1	0.58	14.73	0.84	21.84	0.54	13.7
DC – 4	1/4	6.35	1/2	12.7	0.63	16	0.92	23.37	0.6	15.3
DC – 5	5/16	7.93	9/16	14.3	0.67	17.01	0.96	24.38	0.64	16.2
DC – 6	3/8	9.52	5/8	15.9	0.72	18.28	1.01	25.65	0.66	16.9
DC – 8	1/2	12.7	13/16	20.6	0.75	19.05	1.15	29.21	0.9	22.9
DC – 10	5/8	15.87	15/16	23.8	0.78	19.81	1.18	29.97	0.96	24.4
DC – 12	3/4	19.05	1-1/16	27	0.84	21.33	1.24	31.49	0.96	24.5
DC – 14	7/8	22.22	1-3/16	30.2	0.94	23.88	1.34	34.04	1.02	25.9
DC – 16	1	25.4	1-3/8	34.9	1.03	26.16	1.51	38.35	1.23	31.2
DC – 20	1-1/4	31.75	1-3/4	44.5	1.23	31.24	2.1	53.34	1.62	41.2
DC – 24	1-1/2	38.1	2-1/8	54.0	1.47	37.33	2.54	64.52	1.97	50.0
DC – 32	2	50.8	2-3/4	69.9	1.94	49.28	3.41	86.61	2.66	67.6

“D” – Dimension is minimum opening – dimensions are for reference only, and are subject to change without notice.

For 1/16, 1/8 and 3/16 in 2, 3 and 4mm tube fittings, tighten the nut 3/4 turn.